Products
Search, filter and compare our products
Toray MicroPly™ TC248SF
Toray MicroPly™ TC248SF is an epoxy composite surfacing film, allowing a smooth, paintable surface from tooling or, a thin-skinned honeycomb stiffened composite structure. It may be cured under vacuum only pressure or under low autoclave pressure.
Toray MicroPly™ SC8020A
MicroPly SC8020A low-density unsupported epoxy syntactic core. SC8020A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin walled composite sandwich structures
Toray MicroPly™ ES72A-2
MicroPly™ ES72A-2 low-density, expanding, unsupported, epoxy syntactic core. Offering reduced processing, a one-shot cure, the ability to anchor inserts / fastenings and, the opportunity to consider lightweight, thin walled composite sandwich structures.
Toray MicroPly™ EM-5A
Toray MicroPly™ EM-5A is an expanding cyanate ester syntactic film (core splice). Its' unexpanded density is approximately 0.80 g/cc (50 pcf) and it exhibits an expansion ratio of up to 4 times. It is available in continuous film rolls or in sheet form.
Toray MicroPly™ EF8020
Toray MicroPly™ EF8020 is a modified, high-strength, structural epoxy film adhesive for honeycomb core and laminate bonding. EF8020 is compatible for co-cure with Toray’s 8020 prepreg and SC8020 syntactic core.
Toray Cetex® TC960
Toray Cetex® TC960 is a polypropylene (PP) composite designed for applications requiring high impact resistance, but where cost is a factor. The impact toughness of TC960 makes it ideal for use in truck bodies, vehicles and vehicle enclosures.
Toray Cetex® TC910
Toray Cetex® TC910 is a high strength thermoplastic composite using a polyamide 6 (PA6) matrix resin designed for applications such as automotive and transportation. It provides good heat distortion temperatures and excellent solvent resistance.
Toray Cetex® TC1200
Toray Cetex® TC1200 is a semi-crystalline polyetheretherketone thermoplastic composite, offering excellent resistance to chemicals and solvents. It is flame retardant and combines outstanding toughness with high temperature performance.
Toray Cetex® TC1100
Toray Cetex® TC1100 is a high-end but cost-effective thermoplastic composite material, utilizing a PPS polymer for excellent mechanical properties and an outstanding chemical and solvent resistance. Qualified for structural application at airframe OEMs.
Toray Cetex® TC1000 Premium
Toray Cetex® TC1000 Premium is an high-end thermoplastic composite, utilizing the amorphous PEI polymer for outstanding toughness and an inherently outstanding FST performance. Qualified at OEMs for use in aircraft interior and secondary structures.
Toray Cetex® MC1100
Toray Cetex® MC1100 PPS is a thermoplastic BMC based on TC1100 UD tape using high strength fibers in lengths of up to 25.4mm (1 inch). MC1100 also allows complex shapes to be made with varying wall thickness, integrated ribs and reinforcing structures.
TC410
TC410 cyanate ester prepreg achieves extremely low moisture absorption and high conversion levels. TC410 is designed specifically for radomes and satellite structures, providing good resistance to radiation, low microcracking and, low dielectric and loss.
TC380 New
TC380 is a toughened epoxy prepreg, balanced with excellent OHC, OHT, CAI, and GIC/GIIC properties, low moisture absorption and outstanding hot/wet retention. TC380 is optimized to facilitate the construction of large or complex composite assemblies.
TC346 New
Toray TC346 is a high temperature epoxy component prepreg developed for structural applications within Formula 1 and high performance automotive.
RS-3 / RS-3C
RS-3 is a modified cyanate ester prepreg, providing a good balance between toughness and high temperature/wet performance. RS-3 is qualified in satellite, airframe/missile and, radome structures. RS-3C is a controlled flow vacuum bag only cure version.
RS-16
RS-16 is a two-part low viscosity cyanate ester RTM resin for wet winding, RTM and VARTM processing. RS-16 is intended for lower temperature exposure and is an ideal system when used with different materials limiting the upper cure temperature.
MS-4H
MS-4H is carbon fiber / epoxy resin compression molding system using high strength, standard modulus (HS) carbon fiber. MS-4H is an excellent low cost, high performance BMC and processes very well in medium to large heavy parts.
Flex-Core - Aluminum Core—Aerospace Grade
Flex-Core® aluminum aerospace grade honeycomb core is available in corrosion resistant 5052 and 5056 alloy. It has unique cell configurations that permit small radii of curvature without deformation of the cell walls or loss of mechanical properties.
EX-1522
EX-1522 is a toughened modified epoxy prepreg. EX-1522 displays very low moisture absorption, also excellent mechanical and thermal properties. EX-1522 has a flammability rating of V-0, which lends itself to usage in low flammability applications.
EX-1515
EX-1515 cyanate ester prepreg provides optimal mechanical properties, high radiation resistance, microcracking resistance, low moisture absorption / low outgassing while retaining toughness, a low 244°F (118°C) stress-free temperature and long out time.
EX-1510
EX-1510 is a toughened two-part cyanate ester resin with extremely low viscosity at room temperature, allowing RTM to take place without heating the resin. This facilitates mold filling time for difficult and / or large RTM’d structures and reduces waste.
E760
E760 is a highly toughened epoxy component prepreg with exceptional high temperature performance. E760 has been designed for use in mechanically demanding structural applications exposed to elevated temperature environments e.g. Formula 1.
E745
E745 is a 135°C (275°F) cure toughened epoxy component prepreg. E745 has been developed for impact structures and other mechanically demanding structural applications. E745 can be impregnated into a range of fiber and fabric types.
E721-FR
E721-FR is a 120°C (248°F) cure modified epoxy prepreg of medium viscosity. E721-FR offers excellent structural properties, flame retardancy and exceptional toughness allowing direct lamination to honeycomb without the use of a film adhesive.
Aluminum Honeycomb Core—Aerospace Grade
Toray’s aluminum aerospace grade honeycomb core is available in corrosion resistant 5052 and 5056 alloys. It offers high strength-to-weight properties at relatively low cost; particularly suitable as a shear carrying core in sandwich panel structures.
Need more information?
At Toray our goal is your success. If you have any questions or would like to learn more, please contact us.
Toray Advanced Composites UK
Need more information?
At Toray our goal is your success. If you have any questions or would like to learn more, please contact us.