Products

Toray MicroPly™ TCF4035 is a syntactic epoxy film compatible with 121°C (250°F) prepregs. It features a long out time and is offered in a density of approximately 0.6 g/cc (40 ± 4 pounds per cubic foot).

Toray MicroPly™ TC4015 cyanate ester film adhesive, formulated for low moisture absorption and high temperature bond strength applications. Its strength and toughness when bonding is often greater than epoxy and polyimides especially at high temperatures.

Toray MicroPly™ TC235SF-1 is an epoxy composite surfacing film, allowing a smooth, paintable surface from tooling or, a thin-skinned honeycomb stiffened composite structure. It may be cured under vacuum only pressure or under low autoclave pressure.

Toray MicroPly™ RS-4A is a cyanate ester based film adhesive developed to provide good adhesive performance for core / face skin structures, co-curing and secondary bonding.

Toray MicroPly™ EX-1543 cyanate ester film adhesive formulated for low moisture absorption and/or low dielectric constant and loss applications. It provides strength and toughness when bonding solid, honeycomb or foam core structures at high temperatures.

Toray Cetex® TC915 is a thermoplastic composite using a high-performance polyamide matrix resin. This product provides exceptional mechanical properties higher than typical polyamide-based composites and Nylon materials.

Toray Cetex® MC1100 PPS is a thermoplastic BMC based on TC1100 UD tape using high strength fibers in lengths of up to 25.4mm (1 inch). MC1100 also allows complex shapes to be made with varying wall thickness, integrated ribs and reinforcing structures.

TC264-1 is a flame-retardant epoxy prepreg developed for oven-cure fabrication composite processes utilizing expendable or reusable lay-up mandrels. TC264-1 is ideal for use in applications such as ducting, decorative enclosures and panel assemblies.

MS-4H is carbon fiber / epoxy resin compression molding system using high strength, standard modulus (HS) carbon fiber. MS-4H is an excellent low cost, high performance BMC and processes very well in medium to large heavy parts.

MS-1A is a high-performance carbon fiber / epoxy resin compression molding system based on high modulus carbon fiber. MS-1A compression molding compound yields unparalleled stiffness and high strength. MS-1A is qualified for space applications.

EX-1510 is a toughened two-part cyanate ester resin with extremely low viscosity at room temperature, allowing RTM to take place without heating the resin. This facilitates mold filling time for difficult and / or large RTM’d structures and reduces waste.